OOOPS, Time to Back Up and Punt

We drug both sides outside when I finished finishing the second side, and crap if they didn't look totally different. Side one was a sickly yellow compared to the second, which was much closer to the color we were trying for.

We thrashed our hair and put on sack cloth, and finally decided to make side one again. So close to assembly, and now a major setback.

Now we are in superdrive to pump out another side. Thank God we had two more sheets of the oversized plywood. The deck and floor will have to be pieced together, but there are design benefits to be had by going in this direction. I will not have to creatively frame the floor to bridge the gap from the five foot wide plywood to the five and a half foot wide trailer.

To save time we will be building the floor at the same time we are finishing side one-number two. We started by stripping the trailer to its bare bones. I am going to be building a rack that will attach to the axle so we can flip the trailer over and back to prep both sides. We will also be using the bum side as a template to mock things up. Lots and lots to do.

Hustling buns now.

Now we are cooking with grease. The inside of all the parts are done and today I got the second of seven coats of varnish on the outside. The wave went on really well this time with just touchups around the edges. I still get a little heavy handed with the sander though, and got two thin spots on the white. I'll probably be the only one that ever notices.

I am doing a few things to speed up and improve the process on this side. I am finishing all three pieces at the same time, taping off the edges so there are virtually no drips, and vacuuming through the sander so there is much less dust and tack-ragging. All the varnish should be done by the weekend.

It has been so cold and wet here, but I got the garage hooked up with a little heater. A good hoodie and some tunes help too.

We are so excited to get to the assembly stage. I am going to start disassembling the trailer and shedding any thing not necessary. Dry fits, bed lining, electrical, spars, bulkheads, cabinetry, windows, skylights... woo hoo!!! It's about to get fun, and my new friend Todd has volunteered with some help. I am going to need it.

Painting the Inside

The last coats of varnish have dried on the trim ring and door. Finally!

Mosquitoes kept landing in the varnish on the door, which was odd because this hadn't happened before. Not one mosquito the entire time we were varnishing our huge first side. Weird. Maybe next time we'll use a fan to blow them out of the way.

This weekend we flipped over our first finished side and began work on the inside of the panel. We set it up on painters pyramids so the finished side doesn't get scratched. Jeremy sanded it out nice and smooth.

When Jeremy originally painted the outside of the panel he taped the unfinished side so when the varnish ran over the edges it wouldn't bleed. The varnish that ran over pooled on the tape so I cut it off with an xacto knife and Jeremy sanded that out too.

Then he stained it white. Everything covered really nicely. You can tell that the trim ring and the side panel are two different colors. Believe it or not the trim ring started out this white color as well. After sanding and many coats of varnish the color dulled into this "sand" color, as I like to call it. The white definitely changed the color of the wood but isn't as striking anymore as when it is first applied.

Jeremy and I both love it. Next is sanding seal and a first coat of varnish! Stay tuned!

They Call it Finishing, but We Just Started

We have been really busy applying a coat of finish each day for over a week. I had to get in the paint post before we are off to a Tearjerkers event this weekend at Elk Neck State Park. Woo hoo! Lots of design ideas up close.

We were trying to achieve a pickled finish, but nobody really pickles anything anymore, they just use a white stain. We chose Cabot because they had the most vibrant colors available in a transparent finish. The problem we encountered was the stain would run underneath the taped edge.

To overcome the wicking I first used an exacto knife and scribed as deep a line as I could manage along the edge of the design. The first line we tried, we cut the line, taped over it, and then tried to run the knife in the same line to cut the tape. We realized pretty quick that this was not working and ended up with more than one line. You can still see the mistakes through the varnish, but luckily it didn't ruin the side.

First we taped off the wave and stained the field white, and then sealed it with sanding sealer.

Then we reversed the masking and stained the blue. Beautiful! The sanding sealer bled a little under the tape and I had to sand it out leaving some shallow gouges along the blue edges. On the other side we stain both colors first and then seal.

We were a little afraid that the white was going to be over powering, but it came out exactly as I had envisioned. So well that we decided to use the same white on the interior surfaces.

Next comes 7 coats of Spar Varnish, lightly sanding between each coat. After this we will set the side to the side and finish the door and the trim ring. Then we flip this side and finish the interior surface.

Can you say labor of love???